Biasi Single Radiator 600mm x 1000mm 3473 BTU

Packaging: To ensure our radiators arrive in pristine condition, we encase each corner with durable plastic end-caps. To protect the glossy finish, we also cover the face of the convector plate with a layer of card and tightly shrink-wrap the whole radiator in strong polythene. We also label our radiators clearly and include all the necessary components and instructions for installation. To get the most out of our packaging, we recommend not to remove the plastic cover until all the construction work is completed and the building is ready.

Connections: All Ecostyle radiators are manufactured with four ½” ISO 228 connections

Pressure Endurance: The maximum working pressure of a Biasi radiator is 10 bar. This must not be exceeded when planning your heating system. In systems with high buildings, it’s important to consider the dynamic additional pressure given by the pump device, in addition to the normal hydrostatic pressure. All Biasi radiators are pressure tested in production.

Brackets: Concealed ‘L’ shaped brackets are used for mounting the radiator to the wall. This type of bracket gives the installer a choice of using the long or short side of the bracket. All radiators are supplied with two or more brackets depending on length. To minimize expansion and contraction noise, plastic inserts seat the radiator neatly on the bracket. We would suggest that the wall material is checked out before the brackets are mounted, in order to ensure a stable, flush fit.

Plugs and Vents: Every radiator pack contains air vents and nickel plated plugs for a watertight connection.

Bracket Lugs: Radiators are manufactured with 2 and 3 pairs of lugs, depending on length. Ecostyle from Biasi is one of the largest ranges of panel radiators on the market and provides a smart choice for ease of installation. Our modern radiators demand remarkably low water content, which ensures fast, controllable heat-up and a high output. This small amount of water, combined with the large convector plate, radiates heat to an economical energy level, which will ensure efficient comfort generation for your home.

Installation: Ecostyle radiators can be used on indirect systems or closed heating systems, where free access to oxygen is prevented. A compact, well-planned and constructed system saves energy and components making up the system. Draining the system requires more fresh water, which results in rust on the inside of the steel surface. Due to this, it is not advisable to empty the heating system for the summer. The water temperature should be between 0-11C, the PH Value between 7 and 9 and the maximum volume of oxygen 0.1 mg/kg. Ecostyle radiators are intended for heating normal rooms. They must always be mounted on dry walls and not directly under a shower or similar item.

Finish: Each compact radiator is subjected to a ‘5 Step’ surface treatment, which includes a multi-stage cleaning process before the paint is applied.

• Laconically degreased

• Phosphate

• Dipped in primer (Catherphoretic)

• Coated with polyester-epoxy resin powder

• Staved (at approx 200C)

 The surface process follows the standard DIN 55900

Standard Colour: White RAL 9016

Materials: Ecostyle radiators are a nominal thickness of 1.2mm and manufactured from high quality cold rolled steel plate to EN10130 standards.

Further information can be found here:

Download Brochure